Single-Stage Plastic Recycling Machine MF-B90 – MF-B120
A plastic recycling pelletizing machine for HDPE, LDPE and PP waste: one extruder with a motor-driven screen changer, cooling water tank and pellet cutter. Screws from 90 to 120 mm and 70 to 100 kg/h.
Voltage and frequency built for your country: 220, 380 or 440 V · 50 or 60 Hz.
Recycling in a single extruder
The waste enters the hopper and the screw melts it. A motor-driven screen changer filters the melt and lets you change the screen quickly. The strands leaving the die cool down in a water tank and the cutter turns them into pellets.
The cutter runs on an adjustable-speed motor synchronized with the extruder’s discharge speed, and temperature is controlled automatically.
Plastic recycling machine MF-B: data sheet
| Parameter | MF-B90 | MF-B100 | MF-B110 | MF-B120 |
|---|---|---|---|---|
| Screw diameter | Ø 90 mm | Ø 100 mm | Ø 110 mm | Ø 120 mm |
| L/D ratio | 20:1 – 22:1 | |||
| Main motor power | 22 kW | 30 kW | 37 kW | 45 kW |
| Output | 70 kg/h | 80 kg/h | 90 kg/h | 100 kg/h |
| Weight | 2,600 kg | 2,800 kg | 3,000 kg | 3,200 kg |
| Footprint (L × W × H) | 5 × 1.5 × 1.8 m | 4 × 1.5 × 1.8 m | 4 × 1.5 × 1.8 m | 6 × 1.5 × 1.8 m |
| Material | HDPE, LDPE and PP waste | |||
| Voltage | For the destination country: 220 / 380 / 440 V, 50 or 60 Hz | |||
Manufacturer’s values. Actual output depends on the material. The final configuration is confirmed in the quotation.
A single-stage pelletizer in our plant
Filmed in our plant on a single-stage machine of this type. In 4 seconds:
- Plastic strands leaving the die
- The strands entering the cooling water tank
Why choose the MF-B
Quick screen change
Motor-driven screen changer to filter the molten plastic.
Synchronized cutter
The cutter motor has adjustable speed and follows the extruder’s discharge speed.
Automatic temperature
Automatic temperature control on the extruder.
Four sizes
90, 100, 110 and 120 mm screws with 22 to 45 kW motors.
Send us your waste
The fastest way to choose the model is to see what you want to recycle. Send us a photo of the waste, the material and how many kilos you generate per day.
Want to see the machine running? Ask Mike Lin for a video on WhatsApp.
Which MF-B model do you need?
Choose by how much waste you generate, and confirm it with us for your material:
The entry model: 90 mm screw and 22 kW motor.
100 and 110 mm screws; both take 4 m of floor length.
The largest screw and motor in the series (Ø 120 mm, 45 kW), for the highest volume of waste.
Warranty, installation and spare parts
- 12-month warranty (wear parts excluded)
- Remote video support for installation and start-up
- On-site technician available (travel costs paid by the buyer)
- Wear spare parts supplied with the machine
- Voltage and frequency configured for your country
- We reply to every inquiry within 24 hours
Questions about the single-stage pelletizer
What materials can it recycle?
HDPE, LDPE and PP waste. If you mainly recycle film or filament, see also the two-stage pelletizer.
Can I use the pellets in my blown film machine?
Yes, PE pellets can go back into the blown film machine. How much you can blend in depends on the film you make.
How much does a plastic recycling machine cost?
It depends on the model and on your material. The MF-B90 to MF-B120 go from a 90 mm screw and 70 kg/h to a 120 mm screw and 100 kg/h. Send us a photo of your waste, the material and how many kilos you generate per day, and we send you a quotation within 24 hours.
What is a pelletizing machine?
It is an extruder that melts plastic waste and cuts it into pellets you can use again. In the MF-B the melt passes a screen changer, the strands cool in a water tank and a cutter turns them into pellets. Read more in plastic recycling pelletizing.
Does the machine run on 60 Hz?
Yes. We configure voltage and frequency for your country: 220, 380 or 440 V, 50 or 60 Hz.
What is the delivery time?
It depends on the model and configuration; we confirm it when you place the order.
Related machines
- Waste
HDPE, LDPE and PP waste: trim from your bag machines and rejected bags. If you recycle mostly film or filament, see the two-stage pelletizer.
- Pellets
The MF-B90 to MF-B120 melt, filter and cut it into pellets, 70 to 100 kg/h.
- Back to film
PE pellets go back into the blown film machine, such as the SJ-A or the mini machine. How much you can blend in depends on the film you make.
Get a quote for the MF-B pelletizer
Tell us what material you recycle and how many kilos per day you generate. We reply within 24 hours.