Plastic Pelletizing Machine
Machines that turn polyethylene and polypropylene waste into pellets: single-stage for HDPE, LDPE and PP (70–100 kg/h) and two-stage for film and filament (150–200 kg/h).
The 2 series side by side
| Series | Extruders | Material | Screw | Main motor | Output |
|---|---|---|---|---|---|
| Single-stage MF-B90 – MF-B120 | 1 | HDPE / LDPE / PP waste | Ø 90–120 mm | 22–45 kW | 70–100 kg/h |
| Two-stage MF-90 / MF-120 | 2 (main + auxiliary) | PE / PP film and filament | Ø 95 / 120 mm + Ø 80 / 90 mm | 22 / 30 kW | 150 / 200 kg/h |
Manufacturer’s catalog values. Actual output depends on the material; the final configuration is confirmed in the quotation.
Plastic granules making machine for your factory
The waste enters the extruder, the screw melts it and a screen changer filters the molten plastic. Several plastic strands leave the die, cool down in a water tank and a cutter turns them into pellets.
In a bag factory, trim and rejected bags can go back into the blown film machine as pellets, in the ratio your film allows.
Single-stage or two-stage. In a single-stage machine, one extruder melts and pushes the material. In a two-stage machine, the melt from the main extruder passes into a second, auxiliary extruder before the die.
Which pelletizer do you need?
It depends on the waste you will recycle and how many kilos per hour you need:
The single-stage pelletizer comes in four screw sizes, from 90 to 120 mm, with 70 to 100 kg/h.
The two-stage pelletizer works with two extruders and reaches 150 or 200 kg/h.
Send us a photo of your waste and how many kilos you generate per day; we will recommend the series and model.
Questions about plastic pelletizing machines
What materials do they recycle?
Polyethylene and polypropylene: the single-stage machine runs HDPE, LDPE and PP waste, and the two-stage machine runs PE and PP film and filament.
What is the difference between single-stage and two-stage?
A single-stage machine has one extruder. A two-stage machine has a main extruder and an auxiliary extruder: the melt passes from the first to the second before leaving the die.
Do they run on 60 Hz?
Yes. We configure voltage and frequency for your country: 220, 380 or 440 V, 50 or 60 Hz.
What is the delivery time?
It depends on the model and configuration; we confirm it when you place the order.
Setting up a bag factory from scratch?
See the complete lineWhat waste do you want to recycle?
Tell us the material, whether it is film, filament or other waste, and how many kilos per day you generate. We reply within 24 hours.